Fully Automatic Single Crimp Single Dip Single Thread (Double Wire Gauge) Housing Insertion Machine
KWS-BE-001
Descriptions: Check for the presence of wires, check for cuts at both ends, stripping detection, crimping pressure management monitoring (detecting whether copper wires are crushed and whether the rubber sheath is damaged), visual appearance inspection after crimping, detecting whether terminals are deformed, whether the crimping position is offset or there are flying wires, detection of the presence of rubber seats, insertion into rubber shells, tension and displacement detection (detecting whether terminals are fully inserted), and distinguishing between good and defective products (hidden collection of defective products).
Technical Parameters：
|
Double wire gauge |
two types of wires with different diameters |
|
Power supply Maximum power |
AC 220V 5KW |
|
Air pressure |
0.4-0.6mbar |
|
Machine weight |
Machine weight is approximately 450KG |
|
Wire cutting length: |
20-800mm |
|
Tinning length (optional) |
1-10mm (customization available for special requirements) |
|
Processing range |
outer diameter: 0.6--2.5mm (customization for special requirements |
|
Wire cutting precision: |
1.0mm + wire cutting length: 0.2% |
|
Stripping length |
0.1-10mm(adding Tinning twisted wires) |
|
Stripping accuracy |
0.2% |
|
Crimping capacity |
crimping capability 2.5T |
|
Crimping accuracy |
0-0.02mm |
|
Maximum number of inserted pin colors |
Supports up to 8 pin different colors (users can customize connector pin assignments: e.g., red for 3-pin or 5-pin, blue for 2-pin or 8-pin). |
|
Maximum number of inserts: |
30 holes in double rows (customization available for special requirements) |
|
Capacity: |
1600-2100 (per hour) |
|
Basic inspection functions: |
Check for the presence of wires, check for cuts at both ends, stripping detection, crimping pressure management monitoring (detecting whether copper wires are crushed and whether the rubber sheath is damaged), visual appearance inspection after crimping, detecting whether terminals are deformed, whether the crimping position is offset or there are flying wires, detection of the presence of rubber seats, insertion into rubber shells, tension and displacement detection (detecting whether terminals are fully inserted), and distinguishing between good and defective products (hidden collection of defective products). |
|
The main body of the machine has a height, length and width |
of 168L*175H*100W + 60cm (the vibrating plate is detachable) |
Hot Tags: automatic single pole crimping tinning and threading (dual-wire gauge) terminal housing inserting machine, China automatic single pole crimping tinning and threading (dual-wire gauge) terminal housing inserting machine manufacturers, suppliers, factory, Auto Dual Crimp Double Housing Inserting Extended Model Machine, Auto Single End Crimping Threading and Tinning Housing Inserting Machine, Automatic Single Pole Crimping Tinning and Threading Dual Wire Gauge Terminal Housing Inserting Machine, Double End Crimping Housing Inserting Machine, Fully Automatic High Speed Terminal Insertion Machine, Auto Multi Station Harness Housing Inserting Machine
