Fully Automatic Dual Crimping Single Threading Housing Insert Machine

Voltage

AC220V

Power

3KW

Air Pressure

0.4-0.6 mbar

Weight

About 400KG

Wire cut length

20-1000mm

Tin dipping

length (optional)

1-10mm (Special requirements can be customized)

Processing range

Outer diameter 0.6-2.5mm (can be customized)

Cut off precision

1.0mm+ wire cutting length L=0.2%

Peeling Length

0.1-10mm (if add wire twist and tin dipping and wire twisting and tinning)

Peeling precision

0.2%

Crimping Force

2.5T

Crimping Precision

0~0.02mm

Wire Color

8 colors (You may insert the wire harnesses into any connector holes of your choice, e.g., red harnesses can be matched with 3-hole and 5-hole connectors,

or blue harnesses with 2-hole, 6-hole and 8-hole connectors)

Connector hole

MAX 30 holes, 3 lines (customized)Double-row, 20 holes Customization for special requirements)

Speed

1600-2100 holes/hr

basic detection function

wires missing , wires knotted, terminals missing, stripping wrong, crimp force monitor, insertion force inspection, visual inspection, connector missing, defective inspection Check for the presence of wires, cut both ends and strip insulation, conduct testing and crimp pressure inspection, pressure management test (check if copper wires are crushed or insulation is damaged). Post-crimp visual appearance inspection (check terminal deformation, crimp position offset and stray wires). Verify the presence of plastic housings, insert terminals into plastic housings, tension displacement test (check if terminals are fully seated). Separate good and defective products (defective products are collected in a concealed manner).

Main body dimensions (length × height × width) of the machine

168*175*100+60CM (detachable vibrate tray)